ISPOFLEX 60HV
Description
ISPOFLEX 60 HV is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humid- ity. It possesses excellent adhesion to various materials: concrete, wood, aluminum, most lacquered metals, polyester, glass, stone etc.
Usage
- Can be applied by a manual or pneumatic gun.
- After application, it is needed to smooth the joint with soapy water.
- It is suggested to use cartridge or sausage in 24 hours after opening.
- Do not apply at a temperature under 5 °C.
- In cold weather, store the packages at about 20 °C before use.
- ISPOFLEX 60 HV cannot be on bituminous substrates, natural rubber, EPDM
- Rubber or on building materials which might bleed oils, plasticizers, or solvents
which could attack the sealant. - If moisture-vapor-transmission condition exists from the substrate as this can
cause bubbling within the sealant. - Opened cartridges should be used the same day. • During application, avoid air-entrapment
- There can be slightly color change in white and grey when exposed to ul- traviolet rays.
- Avoid contact with alcohol and other solvent cleaners during cure.
- Maximum depth /width of sealant must not exceed 12 mm; minimum is 5 mm.
