ISPOFLEX 60HV

Description

ISPOFLEX 60 HV is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humid- ity. It possesses excellent adhesion to various materials: concrete, wood, aluminum, most lacquered metals, polyester, glass, stone etc.

Usage

  • Can be applied by a manual or pneumatic gun.
  • After application, it is needed to smooth the joint with soapy water.
  • It is suggested to use cartridge or sausage in 24 hours after opening.
  • Do not apply at a temperature under 5 °C.
  • In cold weather, store the packages at about 20 °C before use.
  • ISPOFLEX 60 HV cannot be on bituminous substrates, natural rubber, EPDM
  • Rubber or on building materials which might bleed oils, plasticizers, or solvents
    which could attack the sealant.
  • If moisture-vapor-transmission condition exists from the substrate as this can
    cause bubbling within the sealant.
  • Opened cartridges should be used the same day. • During application, avoid air-entrapment
  • There can be slightly color change in white and grey when exposed to ul- traviolet rays.
  • Avoid contact with alcohol and other solvent cleaners during cure.
  • Maximum depth /width of sealant must not exceed 12 mm; minimum is 5 mm.
Download →
ispoflex