ISPOHYBRID 55 TR is a one part, high modulus, MS polymer. Once extruded it cures by reaction to the atmospheric moisture to form a high performance, permanently flexible elastic adhesive. Characterised by a high thixotropy it has a good initial grab (green strength)


  • Environmental friendly – free isocyanates and solvents
  • No hazard symbol required
  • Odourless
  • Permanently flexible in temperatures ranging from -40°C to 90°C
  • No change in volume – No shrinkage
  • No bubble formation
  • Primer-less adhesion on almost every substrate
  • Non-sage consistency – Exceptional thixotropy – load bearing capacity
  • High mechanical/dynamic stress resistance – shock/impact resistant
  • Increase torsional stiffness of final assembly
  • Vibration and sound damping properties
  • Excellent weathering resistance – good colour stability and UV resistance
  • Over-paintable wet on wet with many water or solvent based paints (preliminary tests recommended)